Omega FoodPro - Manual (Page 16)

17
1. Place the large work bowl onto the
motor housing with the main handle
to the left of the power panel. This
aligns the bowl to properly engage the
safety interlock. Turn the main handle
to the right until it “clicks” or “locks”
into place. The main handle should
now be centered with the Power Panel.
2. Inset the Min Chopper Bowl into the
Large Work Bowl. You may have to
rotate the bowl until it is properly
seated. The Mini Chopper Bowl is
not properly inserted if it can still
be rotated.
3. Place the Mini Blade onto the main
motor shaft. You may have to rotate
the blade partially to properly “seat”
onto the shaft.
4. Place the Work Bowl Cover onto the
Work Bowl with the interlock “tab”
to the left of the main handle. Turn
the Cover to the right until it “clicks”
or “locks” into place. The “tab” should
now be aligned with the Main Handle.
ASSEMBLY-MINI CHOPPER
1.
2.
3.
4.