Oki lan 7100e+ - Manual (Page 22)

22 Network print server
|
Please select(1 - 2)? _1
[prn1]
Ready
Please select(1 - 2)? _2
[system]
MLETB07 Version 1.0.0
TCP/IP status
IP address : 192.168.20.127
Subnet Mask : 255.255.255.0
Gateway addr : 192.168.20.254
NetWare status
NWPrint mode : Failed
EtherTalk status
Zone Name : *
Type Name : LaserWriter
Object Name : ML0011BC
97: For resetting the network print server to factory default.
98: For returning to the previous screen without changing
network print server settings.
99: For returning to the previous screen after changing
network print server settings.
TCP/IP setup screen
Select [1] on the Main Screen to display this screen.
Configure if using TCP/IP.
Please select (1-99)? _1
No.
Message Value
1 : TCP/IP protocol : ENABLE
2 : IP address : 192.168.20.127
3 : Subnet mask : 255.255.255.0
4 : Gateway address : 192.168.20.254
5 : RARP protocol : DISABLE
6 : DHCP/BOOTP protocol : DISABLE
7 : ROOT password : “”
99 : Back to prior menu
Please select (1 - 99)? _
SNMP setup screen
Select [2] on the Main Screen to display this screen.
Configure if using SNMP.
Please select (1-99)? _2
No.
Message Value
1 : Authentic community :”******”
2 : Trap community
:”public”
3 : Trap address :0.0.0.0
4 : SysContact :””
5 : SysName :””
6 : SysLocation :””