Fax machine does not print, Establish connection with netware server – Oki lan 7100e+ User Manual
Page 45
|
User’s Guide: English
45
The fax machine is recognized by utility
but cannot establish connection with
NetWare server
Remote printer mode
•
Check that the print server for which the unit has been
registered has been started up.
•
Check that the correct print server name has been
selected. Check that the name of the print server operating
on the file server is the same as the print server name set
on the fax machine’s print server.
•
Check that the correct NetWare port name has been
selected. Check that the fax machine name (shown on the
print server monitor of the file server) is the same as the
NetWare port name set on the print server card in the fax
machine. If there are several network print servers, set the
NetWare port names so that they are different from each
other.
Print server mode
•
Check to see that the network print server is logged onto
the NetWare server.
•
Make sure that the correct file server name has been
selected. Check that the file server name you use is the
same as the file server name selected for the network print
server.
•
Make sure that the correct NetWare port name has been
selected. Check that the fax machine name set on the file
server is the same as the NetWare port name set on the
network print server. If there are several network print
servers, set the NetWare port names so that they are
different from each other.
•
Check that the NetWare login password matches the set
password.
•
Check that the machine name for the network print server
is the same as the print server name set on the file server.
Fax machine does not print
•
Make sure that the network cable is properly connected.
Replace it if necessary.
•
Make sure that the fax machine is switched on. If it is on,
switch it off and then on.