Sylvania SRTD420 - Manual (Page 28)

– 28 – EN
0C28
AUDIO SETTINGS
Choose the appropriate Audio settings for your equip-
ment as it only affects during the playback of DVD
discs.
1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,
then SETUP twice.
2 Press Arrow L to select “CUSTOM”, then
press ENTER.
¡ CUSTOM mode will appear.
3 Press Arrow ( K / L ) to select “AUDIO”, then
press ENTER to confirm.
4 Press Arrow ( K / L ) to select the below
items, then press ENTER.
DRC (Dynamic Range Control):
¡ To compress the range of the difference between
loud and soft sounds.
¡ The default setting is ON.
DOWN SAMPLING:
¡ Set to ON when outputting a 48 kHz signal.
¡ The default setting is ON.
When playing disc with copyright Protection
¡ If you select OFF, copyright protection will be acti-
vated and sound will be down sampled at 48kHz.
DOLBY DIGITAL:
Set to ON when the unit is connected to an
amplifier/receiver with a Dolby Digital Decoder.
ON:
Outputs a Dolby Digital signal
OFF: Converts the Dolby Digital signal into a PCM
(2 channel stereo)
¡ The default setting is ON.
5 Press SETUP to exit.
QUICK
DVD-V
SETUP CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,
then SETUP twice.
2 Press Arrow L to select “CUSTOM”, then
press ENTER.
¡ CUSTOM mode will appear.
3 Press Arrow ( K / L ) to select “DISPLAY”,
then press ENTER to confirm.
4 Press Arrow ( K / L ) to select the below
items, then press ENTER.
TV MODE:
¡ Press Arrow (K/L) for an item selection, then press
ENTER.
¡ Select 4:3 LETTER BOX for black bars to appear on
top and bottom of the screen.
¡ Select 4:3 PAN & SCAN for a full height picture
with both sides trimmed.
¡ The default setting is 4:3 LETTER BOX.
STILL MODE:
¡ Press Arrow (K/L) for an item selection, then press
ENTER.
¡ Select “AUTO” usually.
¡ If you select “FIELD”, the picture in the still mode
will be stable.
¡ If you select “FRAME”, the picture in the still mode
will be highly defined.
ANGLE ICON:
¡ Press ENTER repeatedly to turn Angle icon ON or
OFF.
¡ The default setting is ON.
AUTO POWER OFF:
¡ Press ENTER repeatedly to turn Auto Power off ON
or OFF.
¡ The default setting is ON and it will turn the TV/DVD
off automatically after 15 minutes of no use.
5 Press SETUP to exit.
QUICK
DVD-V
DISPLAY SETTING
SETUP CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
SETUP
QUICK
CUSTOM
INITIALIZE SETUP
QUICK
CUSTOM
INITIALIZE
T9005UF(EN).QX3 04.4.12 10:06 AM Page 28