Connecting to a stereo system, Fig. 7] [fig. 8] – 12 – Sylvania SRTD319 User Manual
Page 12
CONNECTING TO A STEREO SYSTEM
To Right (red) and Left (white) AUDIO OUT jacks
Stereo system
To ANALOG AUDIO INPUT jacks
AUDIO OUT
L
R
COAXIAL
VIDEO OUT
AUDIO OUT
ANT.
COAXIAL
VIDEO OUT
L
R
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for your stereo system and any other components to be connected to the
TV/DVD.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•
Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (See page 29 to set DOLBY
DIGITAL to OFF.)
AUDIO OUT
COAXIAL
ANT.
L
R
VIDEO OUT
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 7]
[Fig. 8]
– 12 –
EN
0C28
– 12 –
TD805UF.QX33 04.7.30 1:43 PM Page 12