Sylvania SRTD319 - Manual (Page 23)

– 23 – EN
0C28
– 23 – – 23 –
TRACK SEARCH
There are three ways to begin playback on an Audio
CD at a specific Track.
Using Number on the remote control
1 Press Number to enter the desired Track
number.
¡ Playback will start at the selected track.
¡ For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡ To play track 26, press +10, 2, 6.
Using SEARCH MODE
1 Press SEARCH MODE.
¡ The track search display appears.
2 Within 30 seconds, select a desired track
number using Number on the remote control.
¡ For single digits press 0 first.
¡ Playback will start at the selected track.
Using SKIP H G
During playback, press SKIP G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.
¡ If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the
next track.
NOTE
¡ SKIP H G are not available when playback is
stopped.
CD
TITLE / CHAPTER SEARCH
1 Press SEARCH MODE once for the Chapter
search, twice for the Title search during
playback.
2 Enter the desired chapter/title number using
Number on the remote control.
¡ Playback will start at the selected Chapter or Track.
¡ Press CLEAR to erase the incorrect input.
¡ For single digits press 0 first.
DVD-V
/2
TIME SEARCH
1 During playback, press SEARCH MODE
three times (CD: twice) to display the Time
Search on the TV screen.
2 Within 30 seconds, enter a desired disc
time using Number on the remote control.
¡ Playback will start at the specified time.
¡ Press CLEAR to erase the incorrect input.
CD DVD-V
SEARCH FUNCTION
MARKER SETUP SCREEN
Use markers to memorise your favorite places on a
disc.
1 Press SEARCH MODE four times (CD: three
times) during playback.
¡ The display screen and Markers will appear on the
TV screen.
2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “- : - - : - -”
appears in the display.
3 When reaches the desired point, press
ENTER.
¡ The Title or Track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press SEARCH
MODE four times (CD: three times) during
playback and Arrow (s/ B) to choose the
desired marker, then press ENTER.
NOTES
¡ Opening the disc tray or turning off the power or
select AC at step 2 and press ENTER will erase all
Markers.
¡ To clear a marker, using Arrow (s/ B), position the
cursor on to the marker number to be cleared and
press CLEAR.
¡ You can mark up to 10 points.
5 Press SEARCH MODE or RETURN to exit.
CD DVD-V
TD805UF.QX33 04.7.30 1:43 PM Page 23