Omnitron Systems Technology RS-232 - Manual (Page 39)

33
The Formula Sequence
A basic data editing formula for the Omni has the following structure. (The
optional commands are enclosed in brackets):
CODE ID[LENGTH][MATCH]DIVIDE[ADD]SEND
In other words:
1. Identify the bar code symbologies and/or magnetic stripe tracks to which
this formula will apply.
2. Specify data length parameters (if desired).
3. Specify the characters (if any) you would like to match.
4. Indicate how you want to divide the data record.
5. Add a character string (if desired).
6. Send the edited data record to the host computer.
Several code IDs can be specified following the CODE ID command, and
several ADD commands can be programmed as long as they are grouped
together and placed prior to the SEND command.
Note: For non-printable ASCII code, use the Alt-numeric key combination from the
numeric keypad.