Omron Pedometer Downloadable HJ-322U - Manual (Page 17)

17
Low battery indicator
When the low battery indicator appears on the display, immediately
replace the battery with a new CR2032 battery .
Blinking Battery power is low .
Appears
continuously
Battery power exhausted .
The unit stops measurement .
Data cannot be transferred .
NOTES:
•
Do not remove the battery around 12:00AM . The measurement
results of the day when the battery was removed will be added to
the measurement results for the day the battery was inserted .
(It is assumed that the battery will be removed and replaced with a
new one on the same day .)
•
The measurement results are automatically stored in memory on the hour
(e .g . at 12:00AM, 1:00AM, 2:00AM, . . . 9:00PM, 10:00PM, 11:00PM) .
The measurement results from the hour until the time the battery is
replaced will be deleted for that day .
•
When the battery is removed, the time will be reset to “12:00AM” .
Reset the time after inserting the new battery . Refer to “SETTINGS” .
(The measurement results stored in memory and the weight, height
and stride length settings are not deleted .)
•
The attached battery is for initial use . The battery life may be
shorter .
BATTERY LIFE