Omron Pedometer Downloadable HJ-322U - Manual (Page 9)

9
The unit comes with the battery installed . When you use the unit for
the first time, follow the steps below. For setting range details refer to
“SPECIFICATIONS” .
NOTE:
If the initial settings are not correct, the measurement results may not be
accurate .
1. Press and hold
, or .
After the following display, “lb” and “kg” flash on the display.
2. Setting the weight units.
A) Press or to select the mode .
B) Press to confirm the setting.
3. To set the height/stride length unit, repeat steps
A) and B) in step 2 above.
4. To set the distance unit, repeat steps A) and B) in
step 2 above.
5. To set the time display, repeat steps A) and B) in
step 2 above.
6. Setting the weight.
A) Press or to select the desired value
for a setting .
• Press ( ) to advance (go back) one .
• Hold ( ) down to advance (go back)
rapidly .
B) Press to confirm the setting.
7. To set the height, repeat steps A) and B) in step
6 above.
A)
B)
A)
B)
SETTINGS