Orion 52181 - Manual (Page 5)

8 9
Honestech
VHs to DVD
2.0 sE installation
& Guide
1. Return to the Launcher and click
Install VHS to DVD SE.
2. The VHD to DVD SE Software
Installation will start.
3. Follow on screen Installation
instructions.
4. When installation is complete
click the Finish button.
5. If the software is installed
correctly, you should see
“honestech VHS to DVD 2.0 SE”
icon on your desktop.
6. Double click “honestech VHS
to DVD 2.0 SE” icon on your
desktop, enter your product key
in the window (Figure 9). You
can find the product key on the
CD-ROM bag,
7. Select input device to be “USB
2861 Device” (Figure 10).
8. Click “Video Setting”
button located to the right
of the input device. Select the
correct input source for your
device (Figure 11).
9. Click “Control” button to select video standard under the Video
Decoder tab to modify settings such as PAL/NTSC/SECAM country
video standard settings. (Figure 12) Select the Video Proc Amp Tab to
modify image settings such as Brightness, Contrast, Hue, Saturation and
Sharpness.
10. If you have connected your video output device with the Video Capture
device and your computer correctly you can now watch video and record
it. Before you begin recording video, select the output file format from
drop down menu, recording video type, quality and recording duration
time. You can also select output folder for the recorded video file.
11. Click the red record button to
start recording video. If you
select “commercial cutting”,
you can cut the part of the
video you don’t want to save,
when you want to finish, click
the white stop icon, you should
see the thumbnail image of the
recorded file on the top right of
the window.
12. If you select “recording and
burning” and click red record
key, it will start the burning
process right after recording for the designated time.
13. If you want to edit the recorded video file, select “Edit” tab to enter edit
mode (Figure 13). Double- click the thumbnail image of the recorded
file you want to edit or drag the file into the player panel and the file will
play.
14. During the edit phase, you can cut out scenes from your recorded video.
You can also cut your movies into multiple scenes and add storybook
transition effects between each scene. When you have multiple scenes
captured, you can combine them into one continuous clip with transition
effects. In order for you trim or cut part of the scene from the captured
clips, you will need to create two separate clips, one before the part of
the clip to be trimmed and another for the scenes after the part of the
clip to be trimmed. You can even combine two separate clips into one
scene using the storyboard.
15. Click the “Preview“ button to preview the edited video file before saving
it, and click “Merge and Save” button, you can set your video file format
to be “MPEG” or “DV-AVI”.
16. Click the “Burn” tab. Now, you can select output video format, and click
“Option” button, you can select CD/DVD writing device, and select the
disk name, and must select correct input video type, then click “OK”
icon. Select your file or click “Add clips” icon to choose the other files,
according to your want, you can edit the video files by “Create Menu”
function. (Chapter, Select back ground image, Select a navigation button
image, Select the number of clip per page, Text.)
Notice: VCD, SVCD, Data CD, Data DVD formats do not support “Create
Menu” option.
17. Next, insert a blank CD or DVD into your CD/DVD writing device, and
click “Start” icon to publish the video files.
Click the “Help” button on the top right of the software window to read
the “honestech VHS to DVD 2.0” help file.
Figure 11. Video Input Selection.
Figure 12. Video Standard Settings.
Figure 13. Edit mode.
Figure 9. Product Key Check.
Figure 10. Input Device Selection.