Orion 52181 - Manual (Page 6)

10 11
Blaze Video
Magic 3.0
installation &
Guide
1. Return to the Launcher and click
Install Blaze Video Magic 3.0.
2. The Blaze Video Magic Software
Installation will start.
3. Follow on screen Installation
instructions.
4. When installation is complete
click the Finish button.
5. If the software is installed
correctly, you should see “Blaze
Video Magic” icon on your
desktop.
6. Double click “Blaze Video
Magic” icon on your desktop,
you should see the “Register
Blaze Video Magic” window
(Figure 14), click the “Register”
icon, enter user name, E-mail
address and serial number, (You
can find the serial number on the CD-ROM bag) and click “Register”
icon.
7. Click “Add” button to select the source video file you want to convert,
and click the ”Play” button to preview and play the selected video file,
click “Delete” you can delete the selected file from source file list.
8. In the “Output Format” menu, you can select output format for your
video file, and click “Setting “button, you should set the output video file
according to your want.
9. In the “output Path” menu, you can click “Browse” button to change the
output path, and click “location” you can quickly open the output folder
and access the converted video file.
10. Click “Option” button at the right top of the main window, you can select
your desired interface language.
11. Please click “Start” button to begin to convert the added file.
Click the “Help” button on the top right of the software window to read
the “Blaze Video Magic 3.0 help” file.
Macintosh
installation
and Operation
Check your Mac Os X version
Orion Capture software requires
Mac OS X 10.3 or later.
Please go to
 About this Mac.
There you will find your Mac OS ver-
sion (Figure 16).
install Driver and application
Note: If you have any anti-virus soft-
ware enabled, please disable it dur-
ing the installation of the software.
Insert the software CD into your CD
drive.
Open the folder “EzCAP1.0.1R” and
double click the file
“EzCAP1.0.1R.pkg”.
Follow the onscreen instructions.
You may need to enter your Mac
password.
Once installation has completed
please restart your computer
(Figure 17).
Connect the Capture Device to a
USB port on your Mac, after a short
while, the hardware will be installed
in your computer. You now need to
check that the drivers are installed
correctly.
Please go to
 About this Mac
 More info  Hardware  USB.
If the driver is installed correctly you
should see the device listed as in
Figure 18. (Vendor ID: Empia Technology, Inc)
If not then it means that the driver is not installed correctly. You need to
remove the driver and disconnect the USB Video Capture from the Mac,
uninstall them first and then re-install the driver and application again.
Figure 16. Mac OS X Version window.
Figure 15. Blaze Video Magic
Software.
Figure 17. EzCap successful
installation.
Figure 14. Registration Window.
Figure 18. Checking Driver
installation.