Olympus SP-800UZ - Manual (Page 40)

40 EN
To erase all images [ALL ERASE]
1 Use FG to select [ALL ERASE], and
press the A button.
2 Use FG to select [YES], and press the
A button.
Saving print settings to the image data
[PRINT ORDER]
q (Playback menu) X PRINT ORDER
“Print Reservations (DPOF)” (p. 51)
Print reservation can be set only for still
images that are recorded to the card. Set
[INTERNAL/SD] to [AUTO].
Protecting images [ 0]
q (Playback menu) X 0
Protected images cannot be erased by
[ERASE] (p. 18, 39), [ALL ERASE] (p. 39),
[SEL. IMAGE] (p. 39) or [ERASE EVENT]
(p. 39), but all images are erased by
[MEMORY FORMAT]/[FORMAT] (p. 41).
1 Use HI to select an image.
2 Press the A button.
Press the A button again to cancel the
settings.
3 If necessary, repeat Steps 1 and 2
to protect other images, and press the
m button.
Rotating images [y]
q (Playback menu) X y
1 Use HI to select an image.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the
m button.
The new picture orientations will be saved
even after the power is turned off.
●
Adding sound to still images [R]
q (Playback menu) X R
1 Use HI to select an image.
2 Aim the microphone toward the sound
source.
Microphone
3 Press the A button.
Recording starts.
The camera adds (records) sound for approx.
4 seconds while playing back the image.
●
●