47 en, Saving battery power between shots [power save – Olympus SP-800UZ User Manual

Page 47

Advertising
background image

47

EN

For information on using the menus, see “Using the Menu” (p. 4).

To operate images with the TV remote
control

1

Set [HDMI CONTROL] to [ON], and turn
off the camera.

2

Connect the camera and TV with an
HDMI cable. “Connection via HDMI cable”
(p. 46)

3

First turn on the TV, and then turn on the
camera.

Operate by following the operation guide that
is displayed on the TV.

With some TVs, operations cannot be

performed with the TV remote control even
though the operation guide is displayed on
the screen.

If operations cannot be performed with the

TV remote control, set [HDMI CONTROL] to
[OFF] and operate using the camera.

Saving battery power between shots
[POWER SAVE]

t (Settings 3) X POWER SAVE

Submenu 2

Application

OFF

Cancels [POWER SAVE].

ON

When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.

To resume standby mode

Press any button.

Viewing the image immediately after
shooting [REC VIEW]

t (Settings 3) X REC VIEW

Submenu 2

Application

OFF

The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.

ON

The image being recorded is
displayed. This allows the user to
make a brief check of the image
that was just taken.

Even when set to [ON], you can resume

shooting while the image is being displayed.

Automatically rotating images shot
with the camera in a vertical position
during playback [PIC ORIENTATION]

t (Settings 3) X PIC ORIENTATION

During shooting, the [y] (p. 40) setting on

the playback menu is set automatically.

This function may not work properly if

the camera is facing up or down during
shooting.

Submenu 2

Application

OFF

Information about the vertical/
horizontal orientation of the
camera during shooting is not
recorded with images. Images
shot with the camera in a vertical
position are not rotated during
playback.

ON

Information about the vertical/
horizontal orientation of the
camera during shooting is
recorded with images. Images
are automatically rotated during
playback.

Advertising