Oregon Scientific RM622PA - Manual (Page 7)

7
EN
NOTE If the unit is being run on batteries, the
PROJECTION ON / OFF switch does not need to be on.
If you press SNOOZE / LIGHT, the projection light will
turn on anyway.
ADJUSTING THE PROJECTOR
The RM622PA allows you to adjust the projector so that
you are able to view the projection image with more
clarity and convenience.
• The projector head can vertically swivel 180º so that
you may view the time from different positions.
• The IMAGE ROTATION knob allows you to orient
the projected image (continuously from 0º to 330º
clockwise / counterclockwise) so that you can read
the time more conveniently.
• If the projected image is out of focus, use the image-
focusing knob to adjust accordingly until the
projection is in focus.
CHOOSING YOUR TIME ZONE
The top right of the RM622PA’s LCD screen shows a
U.S. map with 4 time zones: P (Pacific), M (Mountain), C
(Central) or E (Eastern). Choosing your specific time
zone makes it convenient to take the projection clock
with you and use anywhere during your travels in the
country.
To choose your time zone, simply press ZONE repeatedly
to toggle between the 4 zones and stop at the desired
setting. The time will automatically adjust accordingly.
INDOOR TEMPERATURE
The Atomic Projection Clock monitors and displays
indoor temperature. The indoor temperature is shown in
Fahrenheit (
°
F) only. The unit is capable of measuring
temperatures within the +23
°
F to +122
°
F (-5
°
C to
+50
°
C) range.
RESETTING THE UNIT
The RESET hole is located in the main unit battery
compartment. Press RESET when you change the
batteries and whenever performance is not behaving as
expected (for example, unable to establish radio
frequency link). The clock will reset to its original default
values.
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.