Oki C 5100n - Manual (Page 11)

PAPER RECOMMENDATIONS > 11
CASSETTE TRAYS
If you have identical paper stock loaded in another tray (2nd tray if you
have one, or multipurpose tray) you can have the printer automatically
switch to the other tray when the current tray runs out of paper. When
printing from Windows applications, this function is enabled in the
driver settings. (See “Printer Settings in Windows” later in this guide.)
When printing from other systems, this function is enabled in the Print
Menu. (See “Menu Functions” later in this guide.)
MULTIPURPOSE TRAY
The multipurpose tray can handle the same sizes as the cassette trays
but in weights up to 203g/m². For very heavy paper stock use the face
up (rear) paper stacker. This ensures that the paper path through the
printer is almost straight.
The multipurpose tray can feed paper widths as small as 100mm and
lengths up to 1200mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock
between 90g/m² and 128g/m² and the face up (rear) paper stacker.
Use the multipurpose tray for printing on envelopes and
transparencies. Up to 50 sheets of transparencies or 10 envelopes
can be loaded at one time, subject to a maximum stacking depth of
10mm.
Paper or transparencies should be loaded print side up and top edge
into the printer. Do not use the duplex (two sided printing) function.
Size Dimensions Weight (g/m²)
A6 (Tray 1 only) 105 x 148mm
Light 64-74g/m²
Medium 75-90g/m²
Heavy 91-120g/m²
Ultra heavy 121-176g/m²
(Tray 2 only)
A5 148 x 210mm
B5 182 x 257mm
Executive 184.2 x 266.7mm
A4 210 x 297mm
Letter 215.9 x 279.4mm
Legal 13in. 216 x 330mm
Legal 13.5in. 216 x 343mm
Legal 14in. 216 x 356mm