Oki C 5100n - Manual (Page 41)

MENU FUNCTIONS > 41
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you prefer
to work.
SYSTEM CONFIGURATION MENU
Items Settings Explanation
POW SAVE TIME 5
15
30
60
240 Adjusts the idling time before the printer
automatically switches into power saving
mode. In this mode power consumption is
reduced to a low level required to just keep
the printer operating and ready to receive
data. When a job is sent the printer will
require a warm-up time of up to 1 minute
before printing can begin.
CLEARABLE
WARNING ON
JOB When ON, non-critical warnings, such as
requests for a different paper size, can be
cleared by pressing the
ON LINE button.
When set to JOB, they are cleared when the
print job resumes.
MANUAL TIMEOUT OFF
30
60 Specifies how many seconds the printer will
wait for paper to be fed before cancelling
the job.
WAIT TIMOUT 5~ 40~300 Specifies how many seconds the printer will
wait when received data pauses before
forcing a page eject. In PostScript Emulation
mode the job will be cancelled if timeout
occurs.
LOW TONER CONTINUE
STOP Specifies whether the printer should
continue printing even after a low toner
condition is detected.
JAM RECOVERY ON
OFF Specifies whether the printer should
perform jam recovery after a paper jam has
occurred. If ON, the printer will attempt to
print again any pages lost due to a paper
jam once the jam has been cleared.
LANGUAGE English, German,
French, Italian,
Spanish, Swedish,
Norwegian,
Danish, Dutch,
Turkish,
Portuguese, Polish Sets the language used for the display
window and printed reports.