Oricom BB200 - Manual (Page 11)

- 11 -
PHONEBOOK MEMORIES AND CALLER ID
MEMORIES
You can store up to 10 numbers in the phonebook memory. Each stored number can
be up to 25 digits.
TO STORE A NUMBER IN THE PHONEBOOK
Make sure the handset is in the standby mode.
Press the button and hold it until the symbol
&flashes on the display.
1. Key in the number you want to store (max 25 digits).
2. If you need to correct a number whilst entering use the and buttons to
move the cursor from a digit to another, and the DEL button to delete a wrong digit
to the left of the cursor.
3. Briefly press the button, again, (the telephone number moves to the right on the
display and the cursor flashes on the left). Key in a memory location number (0 to 9).
4. The display goes back to standby mode.
To store another number, start again from step 1.
Tip: You can delete a record by simply storing a new number in the same
location.
TO DIAL A NUMBER FROM THE PHONEBOOK MEMORY
1. When the handset is idle press briefly the button to enter the Phone Book.
2. Key in the memory location number, if the wrong number appears on the display,
key in another memory location number (0 to 9) to view the other stored records.
3. Press the button or the X button to call the desired number.
TO DELETE A NUMBER FROM THE PHONEBOOK MEMORY
1. Press the button and hold it until the symbol
& flashes on the display.
2. Briefly press the button, again, a dash “-“will appear on the display.
3. Key in the memory location number (0 to 9).
4. You hear a confirmation tone and the display goes back to standby mode.