Olympus LS-7 - Manual (Page 65)

65
4
EN
Menu setting method
Menu setting method
When you select [1file]:
1 Press the + or − button to select the file
you want to move or copy.
2 Press the `OK button to select the file.
When you select [Selected files]:
1 Press the + or − button to select the file
you want to move or copy.
2 Press the `OK button to check the file(s)
selected.
3 Repeat steps 1 and 2 until all the files
you want to move/copy are selected then
press the F2 (GO) button.
8 Press the F2 (GO) button.
• File move or file copy will start if
[Moving!] or [Copying!] appears
on the display. During the process,
the progress status will be shown in
percentage. The process is completed
when [File move completed] or [File
copy completed] is displayed.
Notes
• The recorder cannot copy when the
memory capacity is not sufficient.
• The recorder cannot move or copy when
the number of files exceeds 200.
• Do not remove the batteries during
moving or copying. This may damage the
data.
• A file cannot be moved or copied to the
same folder.
• When the operation is canceled during
moving or copying, only the file that is
being moved or copied is effective, all
other files will not be moved or copied.
• Files which are locked will remain so even
after they are moved or copied.
• DRM files cannot be moved or copied.
• Files cannot be moved or copied directly
under the [Recorder] folder.
When you select [All files]:
When all files are selected, all the files in the
folder will be automatically selected and the
recorder will move to the [Folder to move]
screen.
7 Press the
9 , 0 or + , −
button to select the folder you
want to move or copy the file to.