Optiview 2.28.06/4.37 User Manual
Page 7
- 7 -
2.
Enter the local or public IP address of the host server.
3.
Enter the port number to be use to communicate with the host server.
4.
Enter the user name account to be used to connect to the host server.
5.
Enter the password of the username account used for login (at item# 9).
6.
Select which type of machine you are going to connect into. Options are:
PC DVR, Embedded and Video Server.
7.
Select the total number of camera the host device is capable of handling.
8.
Select “Yes” if the host server is using dynamic IP or NO if it is using static
IP address.
9.
Enter the Dynamic DNS server used by the host DVR/Video server.
10.
Enter the port number used to communicate with the DNS server.
After the required information has been entered into, select
to add the server information on the
list and then click on
to save the data.
To modify existing server connection information, highlight the server information on the list as shown below
and the data will be displayed below it ready for editing.
You will need to click on
to register the changes you made and then
to save the
changes.