Optiview 2.28.06/4.37 User Manual
Page 8
- 8 -
III. Clustering
Remote
Client Connections,
You can connect to multiple host servers (DVR or Video servers) and group them according to your own
preference. There can be a maximum of 16 groups of connections. Each group will have a display screen
partition option starting from single screen partition up to 25-partition screen display. You can setup which
host site camera number will be displayed on each particular window screen and have the option to record
the video feed while viewing the site.
1.
Select the group number you are going to use for the
group of sites.
2.
Select the display screen partition you preferred for each
group.
3.
For each window, you have the option to select whose host servers will it connect to and what camera number
from that particular site would you want to be displayed into it.
4.
Select the frame rate to be used which may be auto, real-time and 1 fps. It is
recommended to leave it at auto.
5.
Select the record mode you prefer for a specific camera. You can select “continuous
recording” which means that upon connecting to the site, the client software application will start recording
video from the host camera to your local hard drive or “By plan Record” which will follow the scheduled record
settings on the “Record Set” setup menu.