QSC Audio DSP-3 - Manual (Page 23)

Section 2:
Installation-
Application Examples
DSP-3 Directly Mounted to QSC Amplifier. Audio Inputs via Terminal Block Inputs
DSP-3 Directly Mounted to QSC Amplifier. Networked OR Local Control. Audio Inputs via DataPort.
The following examples show basic hook up information that assumes a two-channel, full range audio signal driving the load. Refer to your
amplifier’s hardware manual for other output configurations. All audio signals are line level.
23
NOTE: External accessory power supply may be required on older models, see page 2 for full application information.