Quatech HSU-300 - Manual (Page 29)

Installing the software Quatech Freedom USB Adapter User’s Manual
Step Procedure Description
Step 7 Insert the Quatech installation CD into
your CD-ROM drive.
This is the CD that shipped with the
Freedom USB.
Step 8 Browse or use the down arrow to map to
the correct driver location. The complete path is E:\Serial Port
Adapters\Drivers\Windows 95, 98, Me,
2000, XP for USB\Enhanced.
Replace E:\ with your CD-ROM drive
designation.
Step 9 Click the Next button. The Ready to install the best driver
prompt displays.
Figure 30 - Win 98/98SE Ready to install the best driver prompt
Step Procedure Description
Step 10 Confirm that the device and driver
location are correct.
Click the Next button.
If necessary, use the Back button to
return to the previous screen.
Windows builds a driver information
base, copies the appropriate files from
the CD, and then displays the Finished
installing software prompt.
Figure 30 shows the 98/98SE
Ready to install the best driver
prompt, which lets you double-
check the device that you are
installing and the location of
the driver.
Page 24 Rev 2.02 (2/24/2004)