Teac SR-L280i - Manual (Page 15)

15
EN
GL
IS
H
Setting the Clock
5 Press the TIME button (
. or /) to set the
current minute.
6 Press the CLOCK ADJ button.
The clock starts.
1 In standby mode press the CLOCK ADJ button.
“12 HR” or “24 HR” blinks on the display. If you want to
change the hour mode, press the
. or / button.
< When no button is pressed for 10 seconds, the timer
setting mode will be cancelled.
2 Press the CLOCK ADJ button again.
The “hour” value blinks.
3 Press the TIME button (
. or /) to set the
current hour.
4 Press the CLOCK ADJ button.
The “minute” value blinks.
MEMORY/CLOCK ADJ /