Teac SR-L280i - Manual (Page 28)

28
1 Select “TUNER” using the FUNCTION button.
2 Select FM or AM using the FM/AM button.
3 Select the station you want to listen to (auto
selection).
Hold down the TUNING button (
. or /) for more
than 2 seconds and release it when the frequency
display begins to change.
When a station is tuned in, the tuning process will stop
automatically.
< To stop the auto selection, press the TUNING button.
S e l e c t i n g s t a t i o n s w h i c h c a n n o t b e t u n e d
automatically (manual selection)
When the TUNING button (
. or /) is pressed
momentarily the frequency changes by a fixed step.
Press the TUNING button repeatedly until the station
you want to listen to is found.
Listening to the Radio
If the reception is poor
For the best reception, rotate the FM or the AM antenna
until you get stations clearly.
FM MODE button
Pressing this button alternates between Stereo mode
and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
“STEREO” indicator lights in the display.
< If the sound is distorted and the “STEREO” indicator
flashes, the signal is not strong enough for good
stereo reception. In this case, change to MONO mode.
Mono
To compensate for weak FM stereo reception, select
this mode. Reception will now be forced monaural,
reducing unwanted noise.
1 2 3