The Singing Machine STVG-999 - Manual (Page 16)

CONNECTING A VIDEO COMPONENT FOR INPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from
another video source:
(5) Adjust the BRIGHTNESS, CONTRAST and knobs located under the
monitor of the Singing Machine for the best picture quality.
Connect the unit to your TV or home stereo system using the White and Red connections on the
supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the
unit. Plug the red end of the patch cord into the red AUX OUT jack on unit. Now connect the other
end of the cable’s white (left channel) and red (right channel) plugs to your TV or home stereo
system’s ‘AUDIO IN’ or ‘AUX IN’ jacks.
AUDIO CONNECTION
(1) Locate the multicolored patch cords.
(2) Connect video cable (yellow) to the video in jack on the side of the Singing Machine.
(3) Connect the other end of the video cable (yellow) to the Video Output on another video
source such as a VCR.
(4) Set the Function Selector to AUX mode and the Monitor Selector to AUX.
VERTICAL HOLD
MAKING THE CONNECTIONS
E15
SIDE VIEW OF
SINGING MACHINE REAR VIEW OF VCR
R L
VIDEO OUT AUDIO OUT
VIDEO OUTPUT
(YELLOW JACK)
VIDEO INPUT
(YELLOW JACK)
IN OUT
VIDEO
AUX
R
L
SIDE VIEW OF
SINGING MACHINE
REAR VIEW OF TV
R L
VIDEO IN AUDIO IN
AUX OUTPUT
R
(RED JACK)
AUDIO INPUT
L
(WHITE JACK)
AUDIO INPUT
R
(RED JACK)
AUX OUTPUT
L
(WHITE JACK)
IN OUT
VIDEO
AUX
R
L
ENGLISH