Toshiba RD-XS52SC - Manual (Page 104)

104
“Copy” and “Move”
This recorder’s “Dubbing” has the following two
definitions:
Copy:
The original program remains after the operation is
completed.
Move:
The moved program will be erased from the original
location after the operation is completed.
Whether or not you select either command depends
entirely on the given situation. The command may be
predetermined in some situations.
You cannot “move” contents in the following situations.
(Instead, you will want to “copy” them.)
•
The content is protected ( page 52).
• A specified portion of the title (chapter) is copy-
protected, in which case, you cannot move from
DVD-RAM to the HDD.
• You cannot move a Playlist. Only copying is
permitted. When you copy a Playlist to a disc, it will
be treated an Original on the disc. The original
Playlist does not change to an Original.
Also, you cannot “move” or “copy” contents in the
following situations:
•
The recorded content contains a program that
permits a single copy only.
• The title (Playlist) contains a portion that prohibits
copying. Edit the title from the Original and create a
new Playlist.
Notes
• If either the HDD or DVD-RAM is not in optimum physical
condition, an error may occur when you execute “Move”
and some titles or chapters may be lost. If you want to
“Move” non-copy-protected titles and chapters, it is
recommended for safety that you first “Copy” them to the
opposite drive and confirm they have been copied properly.
Then delete the titles and chapters to which you have
executed “Move”.
• The recorder cannot copy/move the following discs:
DVD-VIDEO
VIDEO CD
Audio CD
CD-R
CD-RW
• If you cannot copy/move for some other reason, such as
insufficient disc capacity, etc., a message will appear on
screen. In such a case, follow the instructions in the
message.
• Depending on the content, associated information such as
data management may not be copied/moved.
• You cannot copy/move titles containing still pictures.
• Dubbing to DVD-R may divide the original title depending
on the contents. Also, the DVD-Video format recording
(
page 122) may shift thumbnails.
• A part with aspect ratio 16:9 recorded at bit rate 1.4Mbps
cannot be dubbed to a DVD-R. Change the aspect ratio to
4:3.
• “High speed dubbing” ( page 106) and “Dub selected
items” ( page 108) procedures always comply with
“Aspect ratio(Video mode)” setting ( page 162).
Before dubbing (Continued)
Editing
RD-XS52SU/SC_Ope_E_p103-117 04.9.3, 11:14 104