Toshiba RD-XS52SC User Manual
Page 46
46
Remaining volume
1) Press REC MENU.
REC MENU appears.
2) Press QUICK MENU.
Quick Menu appears.
3) Press / to select “Disc budget calculation”
then press ENTER.
Disc budget calculation menu appears.
4) Press / to select a timer program, then
press ENTER or press ADJUST.
The recorder calculates on a bar graph how much
a specific program (identified by a check mark) will
occupy on the disc.
Pressing ADJUST button can display or remove the
check mark.
5) Correct the parameters of the timer program if
necessary.
(Skip to step 7 if you do not need this.)
You can change “Media”, “Video” and “Audio”.
Select an item you want to modify and press
ENTER button. The item will be ready to be altered.
Press ADJUST button to modify. When complete,
press ENTER button.
You can adjust to a lower mode (SP to LP) and/or
lower the rate to reduce the quality of the recording,
and thus provide more disc capacity (space).
6) Press
.
Program modification is registered.
7) Press REC MENU to exit the GUI.
REC
MENU
Disc budget calculation
9:00 pm
10/24 (Su)
11
6.6
D/M2
HDD
CH
3 10/30 (Sa)
30
:
:
–
–
–
–
:
:
:
:
:
:
pm 11 50 pm
MN
9
6.6
D/M2
DVD
10 11/2 (Tu)
30 pm 10 00 pm
MN
10
2.2
D/M1
HDD
42 11/5 (Fr)
30 am 11 30 am
LP
8
4.6
D/M2
DVD
4
11/5 (Fr)
30 pm 11 30 pm
SP
Audio
Video
Media
End
Result
Date
Start
DVD
HDD
Elapsed
Available
Selected(current)
(
)
DVD
HDD
e.g.
Selected program
Available disc space
When the entry item is marked X, the
recording does not fit. Change the setting.
Elapsed programing (using past data for
programing)
1) Press REC MENU.
REC MENU appears.
2) Press QUICK MENU.
Quick Menu appears.
3) Press / to select “Elapsed programing”,
then press ENTER.
“Elapsed programing” list appears.
4) Press / to select a program, then press
ENTER.
5) Press / to select an item to correct, then
press ADJUST to change the value.
6) When complete, press ENTER.
7) Press REC MENU to exit.
Note
• Up to 36 past programs are saved. Addition of a new one
deletes the oldest one.
Elapsed programing (using past data for
programing)
1) On the REC MENU, press QUICK MENU.
2) Press / to select “Elapsed programing”,
then press ENTER.
The “Elapsed programing” list appears.
3) Press / to select a program to delete.
4) Press QUICK MENU, then / to select
“Elapsed programing delete”, and press
ENTER.
The selected data is deleted.
If you want to delete all data at once, select “All
elapsed programing delete”.
Programmed recording (REC MENU) (Continued)
Recording