Toshiba ESTUDIO 3511 - Manual (Page 290)

290 Printing Guide — Printing from Macintosh
NOTE: • The Page Setup dialog boxes vary across applications.
— Page Attributes
1) Format for
This select the printer to be used for printing.
2) Paper Size
This selects the size of a document to be printed.
SUPPLEMENT: • “Ledger wide” and “A3 wide” are not available when the Single-staple Finisher is
installed.
3) Orientation
This sets the paper printing direction.
• Portrait — The document is printed in the portrait direction.
• Landscape (90 degree) — The document is printed in the landscape direction from left.
• Landscape (270 degree) — The document is printed in the landscape direction from
right.
4) Scale
This changes the size of the printed image on the page. Enter the zoom ratio to enlarge or
reduce an image. You can set any integer from 25 to 400(%) for the zoom ratio.
Available original paper sizes are listed below:
• Letter
• Ledger
• Legal
• Statement
• Computer
• Ledger-Wide
• A4
• A3
• A3-Wide
• A5
• A6
• B4
• B5
• Folio
• 13inch LG
• 8.5inch SQ
• 8K
• 16K
For e-STUDIO450 Series and e-STUDIO280 Series:
“A3-Wide” and “Ledger-Wide” are not available for e-STUDIO450 Series and e-STUDIO280
Series.
1
2
3
4