Telular SX6P-200C User Manual
Page 11
Advertising
Connecting the Handset
Before you use can use the SX6P, you must connect the handset cable.
1.
Connect the handset cable to the phone jack -
see Figure 7.
2.
Connect the handset cable to the handset -
see Figure 7.
Wall Mounting
1.
Remove the mounting clip from the cradle and re-insert it with the tab pointing up -
see Figures
8 and 9.
2.
Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.
Insert
Mounting
Clip into
the Cradle
(tab up)
Mounting Clip in
Cradle (tab up)
Figure 9 – Handset mounting clip for wall-mount.
Remove
Mounting Clip
from the Cradle
(tab down)
Figure 8 – Handset mounting clip assembly.
Phone jack
Handset cable
Handset
Figure 7 – SX6P handset connection.
Phonecell
®
SX6P CDMA
3
User Manual
Advertising