Telular SX6P-200C User Manual
Page 17
Placing a Call on Hold
1.
During a call, press
[Hold]. (A notification will display in the upper right corner of the
LCD display.)
2.
To reactivate the call, press
[Hold] again.
3-Way Calling
Contact your service provider regarding the availability of 3-way calling.
To perform a 3-way call:
1.
Place the first call and wait until it connects.
2.
After the first call is connected, dial the second number.
3.
Press
[Flash]. This connects the second call and puts the first call on hold.
4.
Wait for the second call to connect.
5.
After you are connected to the second call, press
[Flash], which then connects the first call
and completes the 3-way call.
Adjusting the Handset or Speaker Volume
•
During a call, press the up/down arrows to raise (
) or lower (
) the handset/speaker volume.
Voicemail Access
Contact your service provider regarding the availability of voicemail.
1.
Press [Message].
2.
Select
1: Voice Mail.
3.
To listen to your voicemail, select
1: Listen.
4.
If you have deleted all your messages and the message indicator does not go away after an
hour, press
2: Clr Msg Ind.
Reading Text (SMS) Messages
When you receive a new text message, the envelope icon will appear on the display. To access
messages:
1.
Press [Message].
2.
Select
2: Read Msgs.
3.
Use the up/down arrows (
/
) to select the desired message. Press
[Store] to read it.
4.
Once you have read the message, you can do the following:
1: Delete
2: Forward
3: Reply
[Flash]: Call: dials the callback number in the message (if available)
Reminder:
The Speaker is a “listen-only” feature; you must use the handset to speak with your callers.
Phonecell
®
SX6P CDMA
9
User Manual