Repack the printer – Tektronix Phaser 600 User Manual
Page 595
Advertising
R
E P A C K I N G
A N D
M O V I N G
T H E
P R I N T E R
5 7 9
Repack the printer
1
Re-insert these shipping restraints:
a
Transit restraint for the printhead.
b
Shipping blocks for the fuser.
c
Shipping block for the top cover latch.
2
Close all doors and secure them with adhesive tape.
3
Retract the leveling legs under the printer; this allows clearance for the printer
to move freely on its wheels.
4
Unlock the front casters (push the locking lever to the
up
position.
5
Attach the pallet ramps to the pallet (refer to the
Phaser 600 Repacking
Instructions
).
6
Carefully guide the printer onto the pallet.
Advertising