TP-Link ADSL2/2+ ETHERNET/USB ROUTER TD-8817B - Manual (Page 12)

TD-8817B ADSL2/2+ Ethernet/USB Router User Guide
6
Chapter 3. Quick Installation Guide
3.1 Configure PC
After you directly connect your PC to the TD-8817B or connect your adapter to a Hub/Switch
which has connected to the Router, you need to configure your PC’s IP address. Follow the steps
below to configure it.
Step 1: Click the Start menu on your desktop, right click My Network Places, and then select
Properties (shown in Figure 3-1).
Figure 3-1
Step 2: Right click Local Area Connection (LAN), and then select Properties.