TP-Link ADSL2/2+ ETHERNET/USB ROUTER TD-8817B - Manual (Page 14)

TD-8817B ADSL2/2+ Ethernet/USB Router User Guide
8
Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK.
Figure 3-4
)
Note:
You can c onfigure the PC to get an IP address automatically, select “Obtain an IP address
automatically” and “Obtain DNS server address automatically” in the screen above.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the Start menu on your desktop, select run tab, type cmd or command in the field
and press Enter. To continue, please type ping 192.168.1.1 on the following appeared command
prompt screen and then press Enter.
If the result displayed is similar to the screen below, the connection between your PC and the
Router has been established.
Figure 3-5