5 wireless, 1 wireless settings, Refer to – TP-Link TL-WR542G User Manual

Page 25: Section 5.5: "wireless

Advertising
background image

TL-WR542G

54M Wireless Router User Guide

5.5 Wireless

Figure 5-9 Wireless menu

There are three submenus under the Wireless menu (shown in figure 5-9): Wireless
Settings

, MAC Filtering and Wireless Statistics. Click any of them, and you will be

able to configure the corresponding function. The detailed explanations for each
submenu are provided below.

5.5.1 Wireless Settings

The basic settings for the wireless network are set on this page, figure 5-10:

Figure 5-10 Wireless Settings

SSID -

Enter a value of up to 32 characters. The same name (SSID) must be

assigned to all wireless devices in your network. The default SSID is TP-LINK, but
it is recommended strongly that you change your networks name (SSID) to a
different value. This value is case-sensitive. For example, TP-LINK is NOT the
same as TP-Link.

Region

- Select your region from the pull-down list. This field specifies the region

where the wireless function of the router can be used. It may be illegal to use the

- 21 -

Advertising