TP-Link TL-WR542G - Manual (Page 27)

TL-WR542G 54M Wireless Router User Guide
• For 64-bit encryption - You can enter 10 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters.
• For 128-bit encryption - You can enter 26 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters.
• For 152-bit encryption - You can enter 32 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.
Encryption - When you select WPA-PSK or WPA for Authentication Type you
can select either Automatic, or TKIP or AES as Encryption.
Figure 5-10a WPA-PSK
WPA-PSK Passphrase - You can enter a WPA passphrase between 8 and 63
characters long.
Group Key Update Period - Specify the group key update interval in seconds. The
value can be either 0 second or from 30 seconds or up, 1-29 seconds is not a
usable second. Enter 0 to disable the update.
Figure 5-10b WPA
Radius Server IP - Enter the IP address of the Radius Server
Radius Port - Enter the port that radius service used.
Radius Password
- Enter the password for the Radius Server.
Be sure to click the Save button to save your settings on this page.
Note
: The router will reboot automatically after you click save.
5.5.2 MAC Filtering
The Wireless MAC Filtering for wireless networks are set on this page, figure 5-11:
- 23 -