Telstrat 7300A - Manual (Page 8)

14 15
Getting started
4. Thread the power cord from the power supply through the L-shaped opening of the wall bracket and
out through the bottom of the bracket. Now thread the line cord from the phone socket through the
square opening of the bracket. Plug the power cord into the power socket and the line cord into the
line socket of the telephone.
AKVV
ZYaO\
Y_^VO^
:YaO\
KNKZ^Y\
ZV_Q
+-
:YaO\
+NKZ^Y\
AKVV
ZRYXO
]YMUO^
5. Align the holes on the bottom of the telephone base with the lugs on the front of the wall bracket.
Slide the telephone base downward on the bracket until you hear it click into place.
To remove the 7300/7300a from the wall mounting bracket
6. Gently press the release tabs and lift the base up and forward to remove the base from the bracket.
7. Disconnect the power and line cords.
Helpline
If you are having any difficulties setting up or using your Telstra 7300/7300a, please call the TecHelp
on 1300 369 193 or email: [email protected]
Getting started