Teledyne 3020T - Manual (Page 44)

4 Operation Model 3020T
4-8 Teledyne Analytical Instruments
A A A A A
Retype PWD To Verify
Wait a moment for the entry (
<ENT>) screen. You will be given
clearance to proceed.
A A A A A
<ENT> TO Proceed
ENTER the letters of your new password. Your password will be stored
in the microprocessor and the system will immediately switch to the ANA-
LYZE screen, and you now have access to all instrument functions.
If all alarms are defeated, the ANALYZE screen appears as:
0.0 ppm Anlz
Range: 0 — 100
If an alarm is tripped, the second line will change to show which alarm
it is:
0.0 ppm Anlz
AL—1
NOTE:If you log off the system using the LOGOUT function in the
MAIN MENU , you will now be required to re-enter the pass-
word to gain access to SPAN, ZERO, ALARM, and RANGE
functions.
4.5 The LOGOUT Function
By entering LOGOUT , you effectively log off the instrument, leaving
the system protected against tampering until the password is reentered. To
log out, scroll to place the
LOGOUT function between the arrows, and
ENTER to log out. The screen will display the message:
Protected Until
Password Reentered
4.6 The VERSION Screen
Scroll through the MAIN MENU to VERSION , and ENTER. The
screen displays the manufacturer, model, and software version information.