TOA Electronics OVATION U720 - Manual (Page 64)

58 Section 2C: Menu Options
Applying your Roaming Preference
1. Click OK or Apply on the Settings dialog box to reset
your device. When you apply your roaming preference
the following dialog will appear: “Roaming setting was
changed successfully. Please wait while modem is reset
for the changes to take effect.”
2. Click OK to close the dialog box.
3. Wait for the device to reset. This may take a moment.
When the device is reset the Go button will be visible
and the Sprint Connection Manager user interface will
display: “Disconnected.”
Sprint Connection Device Settings
ⅷ Activation Wizard – This option is used only when
activating a new Sprint device. To manually activate your
Sprint account click Activation Wizard. (See “Activating
Your Sprint Mobile Broadband USB Modem” on page 25.)
ⅷ Change User Lock – This option enables you to change and
customize your User Lock Code. (See below for more
information on using your User Lock Code.)
User Lock Code
The Lock Code feature can be used to prevent others from
using your USB modem and your account. When the lock
code is enabled, the message area will display “Device
Locked” and the lock icon will appear in the indicator area.
While the USB modem is in lock mode, you may not launch a
data session without first entering your four-digit lock code.
The default lock code is the last four digits of your Sprint
Tip: When you change your roaming preference an informational
message will appear in your system tray.