Technics SX-PR54/M - Manual (Page 132)

133
QQTG0701
Initialize
This instrument has many settable functions and storable memories. However, you can return the settings
and memory to the factory-preset status.
INITIAL
1. Press the PROGRAM MENUS button to turn it
on.
• The display changes to the following.
2. Select CONTROL.
• The display looks similar to the following.
3. Select INITIAL.
• This display changes to the following.
4. Use the
▲ and ▼ buttons to select the desired
type of initialization.
• PERFORMANCE includes all the items which are listed
below it.
5. Press the OK button.
• The display changes to the confirmation display. Press
the YES button if you wish to execute the initialization.
Press the NO button if you wish to cancel the procedure.
• Initialization begins. When initialization is completed,
“COMPLETED!” is shown on the display and the Key-
board returns to the normal performance mode.
• The USER MIDI and FAVORITES are not initialized by
this procedure.
PROGRAM
MENUS
You can also reset all the PERFORMANCE
items with the following procedure:
Turn off the power to this instrument once.
Then, while pressing the three lower left but-
tons in the RHYTHM GROUP section
(8BEAT, 16BEAT and USA) at the same time,
turn the power on again.
Power on settings
When the POWER button of this instrument is turned on, the settings below are automatically set to
those suitable for piano performance.
• When you turn the power on, you can recall all the settings which were in effect at the time you turned the instrument off:
while depressing the sustain (right) pedal, turn on the power. (However, this function only works for a few tens of minutes
after the power is turned off.)
Sound GRAND PIANO (CONCERT)
CONDUCTOR RIGHT 1
TRANSPOSE C
SYNCHRO & BREAK Off
AUTO PLAY CHORD Off
All PART SETTING items for the RIGHT 1 part Appropriate values
PEDAL SETTING SOFT
17_Initialize.fm 133 ページ ２００３年５月１９日 月曜日 午前１１時３７分