Targus PACD010/400-0137-001B - Manual (Page 3)

3
TARGUS USB 2.0 CD-ROM
SLIM EXTERNAL DRIVE
Introduction
Thank you for purchasing the Targus Targus USB 2.0 DVD/CD-RW Slim External Drive that
allows you to read audio and data CDs. After installing the Targus drive, you can use it at
any time by connecting the supplied Universal Serial Bus (USB) Y-cable to your computer’s
USB ports.
This user’s guide describes how to connect and operate the Targus drive. In addition to this
user’s guide, this package contains:
• Targus Targus USB 2.0 DVD/CD-RW Slim External Drive
• USB Y-cable
System Requirements
To use the Targus drive, your computer must meet the following hardware requirements and
run one of the operating systems listed below.
Hardware
• PC with an Intel ® Pentium ® processor or equivalent and a hard disk drive
• 64 MB RAM or higher, depending on the operating system
• Two (2) USB 1.1 or 2.0 interface ports
NOTES: When connected to USB version 1.1 ports, the drive’s performance level will
be less than optimal. For best results, connect the driver to USB version 2.0 ports.