Targus PACD010/400-0137-001B - Manual (Page 6)

6
Targus USB 2.0 CD-ROM Slim External Drive
1 Turn on your computer and press the drive’s eject button to open the tray.
2 To insert a disc, hold it by the edges and place it in the tray with the readable (plain) side
down.
3 Close the media tray by gently pushing it until it clicks into place.
Targus drive
To remove a disc, grasp it by the edges and gently pull up until the disc is released.
Removing a Disc Using the Emergency Eject Feature
CAUTION: Use the emergency eject mechanism only if the Targus drive is not
connected to your computer or if the computer’s battery is flat and there is no
power available for the eject button. Excessive use of the emergency eject
mechanism may damage it and cause the mechanism to stop working.
To manually remove a disc when there is no power to your computer:
1 Gently insert a slim, straight object, such as a straightened paper clip, into the
emergency eject hole until you feel some resistance.
2 Remove the paper clip.
Audio out jack
Emergency eject hole
Media tray
USB 2.0 cable port
Eject button
Indicator light