Trango Broadband 5010 - Manual (Page 9)

Overview Location of Serial Number & MAC Address
Trango Broadband Wireless — Atlas5010 page 9
Location of Serial Number & MAC Address
The serial number and MAC address label can be found on the back of each radio. The serial number and MAC address
is also provided within the system information (sysinfo) screen.
P5010M-INT
P5010M-EXT
Location of RJ-45/LED Port & IP Reset Button
The RJ-45 connector, diagnostic LEDs, and reset button are located at the bottom of the radio. Functionality of the
LEDs is described later in this text. The IP reset button resets IP configuration and password back to factory default.
The reset button does not reset any other parameters other than IP configuration and password. Typically a user would
only press the reset button when the IP configuration or password in unknown. Reset button must be held down for
approximately 10 seconds.
Trango Broadband Wireless
P5010M- INT Rev. A
S/N: 000001420
MAC: 00 01 DE 00 02 F2
FCC ID: NCYP5010M
Canada: XXXXXXXXXX
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: OPERATION IS
SUBJECT TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERANCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
IP Reset Button
Trango Broadband Wireless
P5010M- EXT Rev. A
S/N: 000001421
MAC: 00 01 DE 00 02 F3
FCC ID: NCYP5010M
Canada: XXXXXXXXXX
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: OPERATION IS
SUBJECT TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERANCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.