Technicolor - Thomson LDK 4502 - Manual (Page 56)

5-2 User's Guide LDK 4502 - HDTV Camera Base Station Diagnostics
Diagnostic LED Indications
Camera Base Station
Camera
Communication
On Air Base
Station
Camera
Connected Test
Camera Communication
This green LED lights when the communications between
Camera and Base Station are OK.
Power Switch and indicator
Switches the power supply to the Base Station on and
off. A built-in light lights to indicate that power is being
supplied to the Base Station.
Base Station
This green LED lights when the local power supplies to
the Base Station are present.
LED Test
When the power to the Base Station is switched on
camera communication and on-air LEDs light
sequentially. If a LED does not light during start-up that
LED is probally defective.
Camera indicator - Test
This bicolour TEST LED lights red or yellow to indicate
the Camera and Triax status:
-
Red lights continuously – Triax short circuit.
- Red flashes – Triax open circuit.
- Yellow – Camera power switched off with the
Operational or Master Control Panel.
Camera indicator - Conected
This green CONNECTED LED lights when the Camera
is connected and the Camera power is not switched off
by the MCP, OCP or Base Station menu.
Diagnostic indicators for camera power
Communication Test Connected
off off green Camera power switched off by the camera power switch.
off yellow off Camera power switched off by the MCP, OCP or base station menu.
1
2
3
1 2 3 4 5
4
5