Passwords – TP-Link TD-W8920G User Manual

Page 78

Advertising
background image

TD-W8920G

108M Wireless ADSL2+ Router User Guide

71

Figure 4-77

To add the IP Address:
1. Click

the

Add button. You can add a new IP Address in the next screen (shown in Figure

4-78).

Figure 4-78

2. Enter the IP address of the management station permitted to access the local management

services.

3. Click

the

Save/Apply button to save the IP Address.

4. Enable

the

Access Control Mode (shown in Figure 4-77).

)

Note:

If Enabled, the Router will permit access to local management services from IP addresses
contained in the Access Control List. If the Access Control mode is Disabled, the function will not
validate, and all IP addresses can access to local management services. The services are the
system applications listed in the Service Control List.

4.7.5.3. Passwords

Choose “Management”Æ“Access Control”Æ“Password”, you can see the screen (shown in
Figure 4-79) which allows you to change the factory default password of the Router.

Advertising