Topcom Skyr@cer WBR 244 - Manual (Page 12)

WBR 244 12
ENGLISH
4.2. WAN STATUS
-> Click Status to check the WAN connection status
4.3. WIRELESS SETUP
-> Click Wireless to go to the wireless section
Basic
- Enable or Disable the wireless part.
- Enter the SSID . Make sure that the wireless clients are set to the same SSID as the Wireless
Broadband Router.
- Enter the channel number.
-> Click Apply to confirm the entries.
HL_WBR244.book Page 12 Tuesday, February 11, 2003 11:44 AM