Topcom Skyr@cer WBR 244 - Manual (Page 6)

WBR 244 6
ENGLISH
2. CONFIGURING THE PC TO CONNECT TO THE CABLE/DSL
ROUTER
Remark
- The routers default IP address is : 192.168.1.1
- DHCP server is ON
If you do not wish to set a static IP address on your PC, you will need to configure your PC to
accept the IP address that the router will provide.
1. Click Start button, select Settings , then Control Panel
2. Double-click the Network Icon
3. In the configuration windows, select the TCP/IP protocol line that has been associated
with your network card/adapter.
HL_WBR244.book Page 6 Tuesday, February 11, 2003 11:44 AM