Specifications, Warranty – Toshiba USB001Z User Manual

Page 17

Advertising
background image

E6581299

- 16E -

6. Specifications

Item

Specifications

Model number

USB001Z

Applicable model

Model with either an RS485 (2-wire type) connector or a common serial connector
(optional).

Usable applications: PCM001Z (V013 or successor), PCS001Z (V001 or successor)

Applicable OS

Windows 98 SE , Windows 2000, Windows XP SP1

*1

However, the personal computer

*2

must have a USB port (series A).

Use environments

Indoor operation at an altitude of 1,000m or less and free from direct sunlight,
potentially corrosive or explosive gases, steam, dust particles, dust/dirt, and
machining fluids (grinding liquid, coolant, included)

Ambient temperature 0 to +50°C

Storage temperature -25 to +65°C

Relative humidity

20 to 93% (free from condensation and vapor)

Vibration

5.9m/s

2

(0.6G) or less (10 to 55Hz) (Compliant with JIS C 0040)

Cooling method

Self-cooling

*1: Windows

®

is listed above as the abbreviation for a Microsoft

®

Windows

®

operating system.

Microsoft

®

and Windows

®

are registered trademarks or trademarks of the US Microsoft Corporation

in the USA and other countries.

*2: No warranty as to the suitability of this product for any computer and any peripheral equipment is

either made or implied.

7. Warranty

Any part of the unit that proves defective will be repaired free of charge under the following

conditions:

1. This product will be repaired free of charge, if some trouble occurs under normal handling within

one year of delivery and is caused obviously by a defect in design or workmanship.

2. The warranty applies only to the delivered unit.

3. For the following kinds of failure or damage, the repair cost shall be borne by the customer even

within the warranty period.

1) Failure or damage caused by improper or incorrect use or handling, or unauthorized repair or

modification of the inverter

2) Failure or damage caused by the unit falling or an accident during transportation after the

purchase

3) Failure or damage caused by fire, salty water or wind, corrosive gas, earthquake, storm or

flood, lightning, abnormal voltage supply, or other natural disasters

4) Damage due to the use of the USB-serial communication conversion unit for non-intended

purposes.

4. If there are any warranty conditions otherwise provided for, those conditions will govern.

Advertising