Toshiba USB001Z - Manual (Page 3)

E6581299
- 2 -
Read first
Safety precautions
This instruction manual and the inverter unit contain important information to avoid endangering
actual operators and other persons and damaging properties and to ensure the proper and safe
product usage.
Before reading this manual, fully understand the safety precautions in the instruction manual
accompanying your inverter. Also, strictly observe the precautions described in this manual.
Limits in purpose
Never use the USB-to-serial conversion unit with any device other than a TOSVERT series inverter, or it could cause an
accident.
General Operation
Danger
Disassembly
prohibited
Never disassemble, modify or repair.
This can result in electric shock, fire and injury. For repairs, call your sales agency.
Prohibited
Don’t place or insert any kind of object into the inverter (electrical wire cuttings, rods,
wires). This can result in electric shock or fire.
That may result in electric shock or fire.
Do not allow water or any other fluid to come in contact with this unit. Do not wipe this unit
with a wet cloth. That may result in electric shock or fire.
Mandatory
Before attempting any wiring steps, power off your inverter and make sure that the inverter
charge lamp is no longer lit.
If this unit begins to emit smoke or an unusual odor, or unusual sounds, immediately turn
power off.
If the equipment is continued in operation in such a state, the result may be fire. Call your
local sales agency for repairs.
Transportation & installation
Danger
Prohibited
Do not place any inflammable substances near this unit.
If an accident occurs in which flame is emitted, this could lead to fire.
Do not connect a LAN cable or modular cable for telephones to the conversion unit. Doing
so could cause a failure or accident.
Do not connect more than one conversion unit to one host device (computer). Doing so
could cause a failure or accident.
Mandatory
Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions may result in malfunction.
Provide your inverter or other equipment with safety devices to prevent a serious accident
from resulting even if the unit malfunctions or fails to operate. Usage without a safety
device can result in an accident.
Use the Toshiba-specified cable for connecting this optional unit. (Refer to page 4.)
The use of any other option may result in an accident.