Triax STR 333 - Manual (Page 14)

3.1 Basic Function Usage
3.1.1 Program Information
After the television channels have been programmed, you will see the
information box each time you change the channels.
• Every time you change channels you will receive program
information for a few seconds. (In the “ Banner Time ” menu you can
select how long this information will be shown.)
• You may change channel with the UP/DOWN button.
You can get “ Channel Banner ” at the bottom of the screen.
• When you press the COLOR button, you can use the banner as a
simple channel operation.
3.1.2 Now-Information Banner
• During “ Channel Banner ” is appearing, when you press the
INFO(BLUE) button, you can get “ Now-Information Banner ”.
• Using “ Now-Information Banner ”, you can get a simple EPG of
“ Now-Information ”.
3.1.3 Next-Information Banner
• During “ Channel Banner ” is appearing, when you press the YELLOW
button, you can get “ Next-Information Banner ”.
• Using “ Next-Information Banner ”, you can get a simple EPG of
“ Next-Information ”.
3.1.4 Channel-Information Banner
• During “ Channel Banner ” is appearing, when you press GREEN
button, you can get “ Channel-Information Banner ”.
• Using “ Channel-Information Banner ”, you can get a detailed
channel listing information.
3.1.5 Volume Control/Mute
• To control audio volume, press the Volume UP/DOWN buttons.
• Volume control bar will be appeared in bottom of the TV screen.
• To temporarily stop the volume, press the MUTE button.
To cancel mute, press the MUTE button again or press the Volume
UP/DOWN buttons.
3. Basic Operation
14