Triax STR 333 - Manual (Page 8)

1.5 Connecting and Installation
1.5.2 To Connect Satellite and Terrestrial Antenna
(Only Combo)
• Connect one end of RF cable to the ANT IN on the back
of the receiver and the other end to a terrestrial antenna
connection or the jack for the public antenna on the
wall.
Ƈ DiSEqC 1.0
• Connect the coaxial cable from the LNB to the LNB IN
jack on back of the receiver.
Ƈ DiSEqC 1.2 Motor
• Connect one end of your coaxial cable to the LNB IN
connector on the receiver and the other end to the
REC or Receiver connector on the DiSEqC 1.2 motor.
• Connect the coaxial cable from the LNB to the LNB
connector on the DiSEqC 1.2 motor.
1.5.1 How to connect the receiver to various other systems
There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local
supplier for assistance in setting-up your system that is best suited to your requirements.
• Combo Receiver
• Combo Receiver
1.5.3 Connect the receiver to a TV set
• Connect the receiver to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V,
TV out (UHF) or S/Video jacks.
1.5.4 Connect the receiver to a VCR
• Connect the SCART jack from the VCR to the back of the receiver.
• Combo Receiver
• Video
• TV
8